Stove invoice "rock" of the press. Granite Zheltau.
Plates invoice "rock" of the press under the splintering produce rectangular blank sawn on four sides by splitting the press. The thickness of the workpiece to split the limited lifting height of the blades of a hydraulic press. Width - the length of the blades of the press. With a width greater than the length harvesting knife edge products outside the field of knives will inject more smoothly. Typically the length of the workpiece is much greater plate thickness. In this case, a surface with two stab products - front and back. When mounted on the adhesive or mortar it has the advantage, as the chipped surface provides better adhesion than sawn. Although, on request can be made slab texture "rock" with a sawn back side. This can be done in several ways. For example, cleaving sawn blanks with a thickness equal to two thicknesses of the end plate in the middle.
Plates invoice "rock" of the press have a relief, which can vary arbitrarily over the entire area of the product. What could be a negative factor. When the edge of one plate sharply rises, and drops abruptly adjacent plate - this may reduce the aesthetic qualities of the lining. In this connection, an invoice "rock" of the press is not looking at a lower price, little used without further treatment. Most often it pinned "in the frame".
The company "PetroMramor" produces and sells all kinds of products made of granite stab at low prices. With the urgent need to buy a plate texture "rock" of granite, one of the competitive advantages of LLC "PetroMramor" is the availability of standard products in stock and a large amount of granite blocks and billets for the manufacture of non-standard orders in the shortest possible time. Constantly in a warehouse there are blocks of fields Revival, Kamennogorsk, Baltic, smoke, gabbro-diabase Drugoretsky, Ladoga, Zheltau yellow, red Zheltau, Baltic Brau, Baltic Green, Mansurov and others.